![Sharp UX-556 Operation Manual Download Page 26](http://html.mh-extra.com/html/sharp/ux-556/ux-556_operation-manual_368317026.webp)
Operating the Answering Machine
25
2. Ans
w
er
ing
Ma
chine
To listen to the outgoing message
To listen to the outgoing message, follow Steps 1 and 2 of the above
procedure and then press
. Note that the general outgoing message
cannot be erased. If you need to change it, simply repeat the recording
procedure.
Note:
If an extension phone is connected to the fax machine, an outgoing
message cannot be recorded, played, or deleted while the extension phone is
being used.
PLAY
4
Press
and speak into the handset to record a message.
•
The outgoing message can be up to 60 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press
.
START/MEMORY
STOP
RESOLUTION
/RECEPTION
♦
It will not be possible to set the reception mode to A.M. if an outgoing
message has not been recorded.
Note:
In A.M. mode, the machine will automatically switch to fax reception if it
detects six seconds of silence after answering a call. For this reason, if a
caller pauses for this length of time while leaving a message, they will be cut
off.
TEL FAX
TEL/FAX A.M.
Operating the Answering Machine
Activating the answering machine
To turn on the answering machine so that callers can leave messages, press
until the arrow in the display points to A.M.
RESOLUTION
/RECEPTION
all.book Page 25 Thursday, October 21, 2004 9:24 AM