<P=003>
Setting 5: REMOTE RECEPTION SELECT
If you don’t intend to use the above TEL/FAX REMOTE NUMBER, you can
turn detection of the number off. This will ensure that the fax never mistakenly
attempts to begin reception if it detects a signal similar to the TEL/FAX
REMOTE NUMBER while you are talking on an extension phone. Press 1 to
turn detection on, or 2 to turn detection off.
•
Initial setting: 1
FUNCTION
4
Press
until
display
shows:
REMOTE RECEPTION
STOP
2
YES
NO
or
TRANSACTION LIST
1
Setting 6: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number
from 1 to 5 as follows:
1 (ALWAYS PRINT):
A report will be printed after each transmission,
reception, or error.
2 (ERR/TMR PRINT):
A report will be printed after an error or a timer
operation.
3 (SEND ONLY):
A report will be printed only after a transmission.
4 (ERROR ONLY):
A report will be printed only after an error occurs.
5 (NEVER PRINT):
A report will never be printed.
•
Initial setting: 4
STOP
FUNCTION
4
Press
until
display
shows:
TRANSACTION LIST
Enter a number
from
1
to
5
DIAL MODE
Option Settings
80
