Sharp UX-108 Operation Manual Download Page 50

Page: 50 / 100

UX178U-BOCY

<P=001>

Making
Copies

Your fax can also be used to make copies. You can use this function to make
a sample copy of a document before transmitting it to see if the resolution or
contrast needs adjustment.

♦

The default resolution for copying is FINE.

Load the document(s) face down.

The display will show:

READY TO SEND

••••

If desired, adjust the resolution and/or
contrast with the

RESOLUTION

key.

COPY/HELP

Press the

COPY/HELP

key.

Incoming calls during copying

The fax goes into manual reception mode during copying, so if a call comes
in at this time, pick up the handset to answer.

To receive a document, press the

START

key after copying is finished. If

you want to begin reception immediately, press the

STOP

key to stop

copying, and then press the

START

key as soon as the document has fed out

and the fax has returned to standby mode.

RESOLUTION

Summary of Contents for UX-108





































































































Search results

Summary of Contents for UX-108

Reviews:

Related manuals for UX-108

Brands by name

Popular brands

Sharp UX-108, Operation Manual

Search results

Summary of Contents for UX-108

Reviews:

Related manuals for UX-108

Brands by name

Popular brands