Sharp UX-108 Operation Manual Download Page 11

Page: 11 / 100

<P=002>

RESOLUTION key

Press this key to adjust the resolution and contrast before sending or copying
a document.

VOLUME keys

Press these keys to adjust the volume of the handset when the handset is
lifted, the volume of the speaker when the

SPEAKER

key has been pressed,

or the volume of the ringer at all other times.

STOP key

Press this key to stop operations before they are completed.

Number keys

Use these keys to dial numbers, and enter numbers and letters during
number/name storing procedures.

SPEED DIAL key

Press this key to dial a 2-digit Speed Dial number.

REDIAL key

Press this key to automatically redial the last number dialed.

SPEAKER key

Press this key to hear the line and fax tones through the speaker when sending
a document.
Note:

This is not a speakerphone

. You must pick up the handset to talk with

the other party.

HOLD/SEARCH key

Press this key to search for an automatic dialing number, or, during a phone
conversation, press this key to put the other party on hold.

Rapid Dial keys

Press one of these keys to dial a fax or voice number automatically. (Note that
you must attach the Rapid Key labels.)

START key

Press this key to send or receive a document.

COPY/HELP key

When a document is in the feeder, press this key to make a copy. At any other
time, press this key to print out the Help List, a quick reference guide to the
operation of your fax.

1. Instal

lati

A Look at the Operation Panel

Summary of Contents for UX-108





































































































Search results

Summary of Contents for UX-108

Reviews:

Related manuals for UX-108

Brands by name

Popular brands

Sharp UX-108, Operation Manual

Search results

Summary of Contents for UX-108

Reviews:

Related manuals for UX-108

Brands by name

Popular brands