Sharp UP-700 Instruction Manual Download Page 103

Page: 103 / 228

101

• TARE TBL# (Use the numeric entry)

Tare table number associated with scale entry (1 thru 9)

• CONDIMENT TYPE (Use the selective entry)

YES : Condiment type
NO : Non-condiment type

NOTE

For UPC, it is fixed to “NO”.

• CONDIMENT (Use the selective entry)

COMPUL.:

Makes a condiment entry compulsory.

NON-COMPUL.: Makes a condiment entry non-compulsory.

NOTE

For UPC, it is fixed to “NON-COMPUL.”.

• SCALE (Use the selective entry)

COMPUL.: Makes a scale entry compulsory.
ENABLE:

Enables a scale entry.

INHIBIT:

Inhibits a scale entry.

• TAXABLE 1 thru 4 (Use the selective entry)

YES : Makes the PLU/UPC taxable.
NO : Makes the PLU/UPC non-taxable.

• FOOD STAMP (Use the selective entry)

Food stamp status
NO : Food stamp ineligible
YES : Food stamp eligible

• GR. DISC. 1 thru 3 (Use the selective entry)

Group discount status
NO : Non-discountable
YES : Discountable

• AGE LIMIT. (Use the numeric entry)

Age limitation (0 thru 99)
When a PLU/UPC for which a figure other than zero (01 to 99) has been programmed as the age
limitation, the birthday entry must be completed.

• GROUP 1 thru 3 (Use the numeric entry)

PLU group number (00 thru 99)

• PRIORITY GR. (Use the numeric entry)

PLU group which is to be given the highest priority to in printing on the remote printer (1 thru 9)

• MODIFY OUTPUT (Use the selective entry)

NO : Will not follow previous PLUs which has the remote printer assignment.
YES : Will follow previous PLUs which has the remote printer assignment.

• OUTPUT KP No.1 thru 3 (Use the numeric entry)

ID number of the network remote printer 1, 2 or 3 (1 thru 9)
If the number “0” is entered, no remote printer will operate.

• CHIT RECEIPT (Use the selective entry)

YES : Prints the PLU sales information on the chit receipt in the remote printer format.
NO : Prints nothing on the chit receipt.

• CVM CTRL CHAR. (Use the numeric entry)

CVM (Color Video Monitor) control character (0 thru 255)

PLU/UPC (continued)

Summary of Contents for UP-700





































































































































































































































Search results

Summary of Contents for UP-700

Reviews:

Related manuals for UP-700

Brands by name

Popular brands

Sharp UP-700, Instruction Manual

Search results

Summary of Contents for UP-700

Reviews:

Related manuals for UP-700

Brands by name

Popular brands