26
Voice Call/Video Calling Functions
Making a Video Calling
Note
•
Use this function with only the video calling enabled phones.
•
Make sure that the battery is fully charged and the signal is
strong before using this function.
•
Turn the loud speaker on or use a switch-equipped Stereo
Handsfree or handsfree kit so that you can talk while looking
at the video calling screen on the main display.
Making a Video Calling
1.
Enter the area code and the phone number you wish to
dial and press
S
, or press [Options] and select “Video
Calling” to dial.
If you enter the wrong number, press
U
to delete the
number to the left of the cursor.
When the line is connected, the image of the called party is
displayed upper on the screen, and yours lower left.
Tip
•
If the called party’s phone is not video calling enabled, you
can press
F
and enter the phone number again to make a
voice call.
Answering a Video Calling
When an incoming call is detected, the phone rings.
1.
Press
S
or
D
to answer the call by video or
A
[Answer] to answer the voice only.
Tip
•
If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name and phone number are displayed on the screen.
Rejecting an Incoming Call
1.
Press
F
while the phone is ringing to reject a call you
do not wish to answer.
Letting the Caller Know You are Unavailable
1.
Press [Busy] while the phone is ringing to send a busy
tone to the caller.
