Sharp SX313, User Manual, Page: 116 / 136

116 Connectivity
Sending All Data
“Connectivity”
→
“Infrared”
→
“Send All”
1.
Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 110.
2.
Select the desired data to send.
3.
Enter the authorisation code.
Network Settings
Selecting a Network Automatically
Each time the power is turned on, your phone always tries to
connect to the preferred network.
If your phone is not connected to the network, you can perform
the following immediately to establish the preferred network
connection.
“Connectivity”
→
“Network Settings”
→
“Select
Network”
→
“Automatic”
Setting the Network Manually
“Connectivity”
→
“Network Settings”
→
“Select
Network”
→
“Manual”
1.
Select the desired network.
Adding a New Network
“Connectivity”
→
“Network Settings”
→
“Select
Network”
→
“Add New Network”
If there are no entries, press and go to step 2.
If there is an entry, press and perform the following steps.
1.
Select “Add”.
2.
Enter the country code (up to 3 digits).
3.
Enter the network code (up to 3 digits).
4.
Enter a new network name (up to 25 characters).
5.
Select “Select network type”.
6.
Select the desired network.
Editing the Preferred List
“Connectivity”
→
“Network Settings”
→
“Select
Network”
→
“Set Preferred”
1.
Select the name of the network you wish to edit.
2.
Select “Insert” to insert over the selected position, “Add
to end” to insert at the end or “Delete” to delete.
(M 12-3)