background image

 2

E

IMPORTANT SAFETY INSTRUCTIONS

 

WARNING

 If the information in this manual is not followed 

exactly, a fire or electrical shock may result and could cause property 

damage, personal injury or death.
•  To reduce the risk of tipping, the unit must be secured by a 

properly installed Anti-Tip bracket.

•  

This unit must be electrically grounded in accordance with local 

codes. 

•  

Wall coverings, countertops and cabinets around the unit must 

be able to withstand heat generated by the unit. 

CLEARANCES AND DIMENSIONS

•  The dimensions and clearances in this manual indicate minimum 

clearance required. 

•   The contact surface of the installation must be solid and level. The 

surface on which the unit sits must be constructed of plywood 

strong enough to support 150 lb.  

22

1

/

8

"

(562.4 mm)

opening

  

3

/

4

"

 (19 mm) thick

plywood surface

(150 lb weight

capacity)

30"

(762 mm)

opening

30

" (762 mm) 

 

clearance

30

(762 mm)

opening

junction box or

electrical outlet

locations

23

11

/

16

"

(601.5 mm)

door front

3

1

/

8

" (

78.5 mm) control panel front

18

13

/

16

"

(478 mm)

29

15

/

16

"

(759.5 mm)

1

1

/

8

"

(28 mm)

optional

back trim 

22

1

/

8

"

(562.4 mm)

mounting

area 

A. 18

1

/

2

" (469.9 mm) opening for elevated top

B. 18

13

/

16

″ (477.5 mm) opening for flush top 

Measure counterop overhang and 

add it to cabinet opening dimension.

SIDE ACCESSORIES

Transform your Radiant Rangetop into the ultimate workstation with 

the Stainless Steel Magnetic Side Accessory Kit. Accessories can 

be placed on either side of the rangetop or attached magnetically 

to each other on a single side, so you are free to configure your 

workstation to suit your needs. 
The Cooling Surface provides a space to set hot cookware after 

removing it from the cooktop or oven, and the Spoon Rest provides 

a space to set utensils while you are cooking. The drip trays of 

the Spoon Rest are removable for easy cleaning, and all items are 

dishwasher-safe. 

NOTE

: An elevated rangetop is recommended for use of Side 

Accessories. To install the unit with an elevated top, use dimension 

(A) for the opening height in the figures on pages 3 and 4.

MAGNETIC SIDE ACCESSORY KIT (SKRS00A7FS)

•  Includes a Stainless Steel Cooling Rack and Spoon Rest
•  Easy to attach magnetic sides
•  Dishwasher safe

SPOON REST

COOLING SURFACE

EASY ATTACHMENT

Status

ARRANGE SOLO

ARRANGE AS YOU LIKE

Summary of Contents for STR3065HS

















Reviews: