Sharp SoftBank 812SH, Instruction Manual

Page: 342 / 402

17-7
17
S! FeliCa (Japanese Onl
y)
C
Via Mail
1
Use S! Mail/e-mail to send password to handset
^
Enter password as subject; leave other fields blank.
^
To confirm IC Card Lock status, send a message via phone or
PC with specified mail address (see
P.17-5 "Mail Remote Lock
Password/Address").
C
Via Phone
1
Using one of the specified phones, call handset
2
End the call
The call is recorded as a Missed Call on your handset.
^
Within three minutes, repeat Steps 1 - 2 until the specified
number of Missed Calls are recorded.
^
Public phones can be used for this function if Set Public
Phone is activated beforehand.
^
Send Caller ID when placing calls from specified phone.
(Caller ID is not required for public phones.)
Set handset response to reader/writer commands: Choose
On for S! Appli to activate S! Application, Browser to access
Internet, Messaging to activate mail, Vibration to vibrate
handset, and Pop-up Message to open pop-up message.
Interface Settings is On for all items by default.
1
Enter Handset Code and press
b
2
Select from S! Appli to Pop-up Message and press
b
3
Choose On or Off and press
b
Activating Remote Lock
After Handset Receives Message
C
IC Card Lock is set and notice is sent from handset to
specified mail address.
Note
H
If handset cannot receive mail IC Card Lock is not set.
After Specified Number of Missed Calls
C
IC Card Lock is set; a message announces Remote Lock activation.
Note
H ^
Missed Call count is reset by calls from numbers not
saved for this function. If series is interrupted, start over
from the beginning.
^
When Call Forwarding is active, Missed Calls may not
be recorded.
Interface Settings
Main Menu
H
Lifestyle-appli
A
IC Card Settings
A
Interface Settings