EN -10-
CHAPTER -3: USING YOUR FRIDGE FREEZER
Accessories
Icematic
(In some models)
•
Take out the ice making tray
•
Fill the water to the line.
•
Place the ice making tray in its original position
•
When ice cubes are formed, twist the lever to drop ice cubes into the icebox.
Note:
• Do not fill the icebox with water in order to make ice. It may be broken.
• The movement of the ice maker may be difficult while the refrigerator is running. In such a case, it should be
cleaned after removing the glass shelves.
Removing the ice maker
•
Take out the glass shelves of freezer compartment
•
Remove the icemaker by moving it to left or right on the shelf.
You can remove the icemaker to create a larger volume of the freezer compartment.
Zero Degree Zone
(In some models)
Keeping food in the Chill Drawer instead of the freezer or refrigerator compartment
allows food retain freshness and flavour longer while preserving its fresh appearance. If
the Chill Drawer tray becomes dirty, remove it and wash with water.
(Water freezes at 0 °C, but foods containing salt or sugar require lowered temperatures
to freeze)
Normally people use the Chill Drawer for raw fish, rice, etc...
Do not put foods you want to freeze or ice trays in order to make ice.
Removing the Chill Drawer
Pull the Chill Drawer out toward you by sliding it on rails.
•
Pull the Chill Drawer up from the rail to remove.
After the Chill Drawer has been removed, it can support a maximum 20 kg load.
Fresh dial
If you want to keep your vegetables longer in that compartment, you have
to change the humidty controller that is located at the front of the crisper,
to closed position. With the aid of this function, humidty level in the crisper
compartment, will stay constant and vegetables will last longer.
If you want to keep your vegetables colder in that compartment, you have to
change the humidity controller to open position. By doing this change, you will
allow the cold air to enter the crisper compartment. As a result of this, your
vegetables will be colder.
If you see any condensation on the glass shelf that is located at the top of crisper, you can change the humidity
controller to open position.
CHAPTER -3: USING YOUR FRIDGE FREEZER
Adapti-Lift
door shelf
(In some models)
Six different height adjustments can be made to provide storage
areas that you need by
Adapti-Lift
.
To change the position of
Adapti-Lift
;
Hold the bottom of the shelf and pull the buttons on the side of
the door shelf direction of arrow (Fig.1)
Position door shelf the height you need by moving up and down.
After you get the position that you want the door shelf, release
the buttons on the side of the door shelf (Fig.2) Before releasing
the door shelf, move up down and make sure the door shelf is
fixed
Note:
Before moving door shelf is loaded, you must hold the shelf by supporting the bottom. Otherwise, door shelf
could fall off the rails due to the weight. So damage may occur on the door shelf or rails.
Fig.1
Fig.2
Visual and text descriptions on the accessories section may vary according to the model.
