EN -14-
CHAPTER -5: CLEANING AND MAINTENANCE
Disconnect the unit from the power supply before cleaning.
Do not wash your appliance by pouring water on it.
Do not use abrasive products, detergents or soaps for cleaning the appliance. After washing, rinse with clean
water and dry carefully. When you have finished cleaning, reconnect the plug to the mains supply with dry hands.
•
Make sure that no water enters the lamp housing and other electrical components.
•
The appliance should be cleaned regularly using a solution of bicarbonate of soda and lukewarm water.
•
Clean the accessories separately by hand with soap and water. Do not wash accessories in a dish washer.
•
Clean the condenser with a brush at least twice a year. This will help you to save on energy costs and increase
productivity.
The power supply must be disconnected during cleaning.
Replacing LED Lighting
If your fridge has LED lighting contact the help desk as this should be changed by authorized personnel only.
CHAPTER -6: SHIPMENT AND REPOSITIONING
Transportation and Changing Positioning
•
The original packaging and foam may be kept for re-transportation (optional).
•
Fasten your appliance with thick packaging, bands or strong cords and follow the instructions for transportation
on the packaging.
• Remove all movable parts (shelves, accessories, vegetable bins, and so on) or fix them into the appliance
against shocks using bands when re-positioning or transporting.
Always carry your appliance in the upright position.
Repositioning the Door
•
It is not possible to change the opening direction of your appliance door if door handles are installed on the front
surface of the appliance door.
•
It is possible to change the opening direction of the door on models without handles.
•
If the door-opening direction of your appliance can be changed, contact the nearest Authorised Service Centre
to change the opening direction.
CHAPTER -7: BEFORE CALLING AFTER-SALES SERVICE
ERROR TYPE
MEANING
WHY
WHAT TO DO
E01
Sensor warning
Call Service for assistance as
soon as possible.
E02
Sensor warning
Call Service for assistance as
soon as possible.
E03
Sensor warning
Call Service for assistance as
soon as possible.
CHAPTER -4: FOOD STORAGE
• For normal working conditions, it will be sufficient to adjust the temperature setting of your refrigerator to +4 °C.
•
The temperature of the fridge compartment should be in the range of 0-8 °C, fresh foods below 0 °C are iced
and rotted, bacterial load increases above 8 °C, and spoils.
•
Do not put hot food in the refrigerator immediately, wait for the temperature to pass outside. Hot foods increase
the degree of your refrigerator and cause food poisoning and unnecessary spoiling of the food.
• Meat, fish, etc. should be store in the chiller compartment of the food, and the vegetable compartment is
preferred for vegetables. (if available)
•
To prevent cross contamination, meat products and fruit vegetables are not stored together.
•
Foods should be placed in the refrigerator in closed containers or covered to prevent moisture and odors.
