60mm
or more
90mm
or more
1390mm
60mm
or more
60mm
or more
1220mm
Before transporting
• Wipe up water in the evaporating pan. Before wiping up
the water, wait more than 1 hour after pulling out the plug
because refrigeration cycle equipment is extremely hot.
(The evaporating pan is located on the rear of the product.)
NOTE :
• Do not bend or damage the ductwork located on the inside
of the evaporating pan. It may cause failure.
Free standing type
NOTE :
•
Position your refrigerator so that the plug is accessible.
•
Keep your refrigerator out of direct sunlight.
•
•
•
Do not place next to heat generating appliance.
•
Do not place directly on the ground. Provide suitable
stand.
Before using your refrigerator
Clean the inside parts with a cloth soaked in warm water.
If soapy water is used, wipe it off thoroughly with water.
WARNING
Do not install the refrigerator in a damp or wet
location as this may cause damage to the
insulation and a leak. Condensation may also
build on the outer cabinet and cause rust.
•
Keep
adequat
e
ventilation
space
around the refrigerat
or
.
•
T
he figure shows the minimum required space for
installing the
re
frigerat
or
. It differs f
rom
the
space
in
the measurement condition of the amount of power
consumption.
•
It
is
p
o
ssible
to
use
the
refrigerator
with
a
less
amount
of power consumption by keeping greater spa
ce
.
•
If using the
re
frigerat
or
in the
space
below
dimension
o
f
the
figu
re
,
it
m
ay
c
aus
e
the
t
em
pe
r
atu
re
s
in
the
unit
t
o r
is
e
, loud
nois
e
, and failu
re
.
INSTALLATION
Allow the refrigerator for 2 hours before plug.
When transporting, carry the refrigerator by holding
the back and stand.
CARE AND CLEANING
1. Remove the shelves and pockets from the cabinet and
door. Wash them in warm soapy dishwashing water;
rinse in clean water and dry.
2. Clean the inside with a cloth soaked in warm soapy
dishwashing water. Then, use cold water to wipe off
soapy water.
When the compartment light is blown
Switching off your refrigerator
If you switch your refrigerator off when you are going away
for an extended period, remove all food, clean the interior
thoroughly. Remove the power cord plug from the power
socket and leave all doors open.
WARNING
Unplug the refrigerator first to prevent electric shock.
Do not splash water directly on the outer cabinet
or the interior. This may lead to rusting and
deterioration of the electrical insulation.
IMPORTANT
To prevent cracking on inside surfaces and plastic
components, follow these tips.
•
Wipe any food oils adhered t
o
plastic comp
o
nents.
•
Some household chemicals may cause damage, so use
only diluted washing-up liquid (soapy water).
•
If undiluted detergent is used or soapy water is not wiped
off thoroughly, cracking of plastic parts can result.
••
3. Wipe the exterior with a soft cloth each time it is soiled.
4. Clean the Magnetic door seal with a toothbrush and
warm soapy dishwashing water.
NOTE :
•
To prevent damage to your refrigerator, do not use heavy
duty cleansers or solvents (lacquer, paint, polishing powder,
benzine, boiled water, etc.).
•
If the power supply is disconnected, please wait for at least
5 minutes before re-connecting power.
•
Do not drop objects inside the refrigerator or strike the inner
wall. This may cause the inner surface to crack.
Contact the service agent approved by SHARP to request a
replacement compartment light. The compartment light is not
to be removed other than by qualified service personal.
Remove the vegetable case.
1.
How to remove Vegetable case
Remove the vegetable case door.
2.
Remove the vegetable shelf.
3.
1220mm
1000mm
60mm
or more
12
Summary of Contents for SJ-BS30E
Page 2: ......