Sharp SJ-BS30E, Operation Manual

Page: 12 / 16

OPERATION
Controlling temperatures
• FREEZER TEMP. CONTROL regulates the quantity of
cold air to the freezer.
• If the freezer does not cool even when setting FREEZER
TEMP. CONTROL to MAX, set REFRIGERATOR TEMP.
CONTROL to MAX as well.
• With FREEZER TEMP. CONTROL set to MAX, there will
be less cold air directed to the refrigerator compartment,
and the refrigerator compartment may not become cold
enough.
• REFRIGERATOR TEMP. CONTROL controls the
compressor running time of the refrigeration system.
• MAX setting will result in colder temperature in the both
(refrigerator and freezer) compartments.
• The freezer compartment may not cool sufficiently when
leaving REFRIGERATOR TEMP. CONTROL as MIN for an
extensive period. To cool the freezer compartment properly,
set REFRIGERATOR TEMP. CONTROL closer to MAX.
Over 35 °C ambient temperature
Under 10 °C ambient temperature
Hints when making ice
1. Do not over fill the Ice cube trays;
otherwise the ice cubes will be
joined together when frozen
2. When the ice cubes are made, turn
the lever clockwise to empty the ice
into the Ice cube box.
NOTE :
To prevent damage to the Ice cube box,
do not make ice in the Ice cube box or pour oil into it.
NOTE :
There may be a slight odor in the refrigerator. This is the smell
of ozone generated by the ionizer. The amount of ozone is
minimal, and quickly decomposes in the refrigerator.
Deodorizing unit
Deodorizing catalyst is installed on the routes of cold air.
No operation and cleaning are required.
Defrosting
Defrosting is fully automatic due to a unique energy saving
system.
If the foods in the refri-
gerator compartment
freezed.
This is because the com-
pressor operation is too
short in winter, and not
enough cold air is provided
to the freezer compartment.
This is because MAX setting (FREEZER TEMP.
CONTROL) may result in too little air flow to the
refrigerator compartment, causing too warm temperature
in the refrigerator compartment.
Lever
Ice cube box
Plasmacluster
(only SJ-BW30P)
The ionizer inside your refrigerator releases clusters of ions,
which are collective masses of positive and negative ions,
into the refrigerator compartment.
These ion clusters inactivate airborne mold fungus.
mold
fungus
Energy Saving (ECO mode)
Use this feature when you want to switch the appliance to
energy-saving operation.
NOTE :
•
While this feature is operating, the inside temperature of the
refrigerator and freezer compartment will be higher than
standard temperature a little bit.
Tips for saving energy
■ Keep the ventilation space as much as possible around
the refrigerator.
■ Keep your refrigerator out of direct sunlight, and do not
place next to heat generating appliance.
■ Open your refrigerator door as briefly as possible.
■
Hot foods should be cooled before storing.
■ Place the food evenly on the shelves to allow the cooling
air to circulate efficiently.
Press the ECO button continuously for 3 seconds or more
( LED light will turn off that mean ECO mode has been started).
ECO mode will be stopped after open the door of refrigerator
compartment automatically.
•
•
When the refrigerator or freezer door is left open, the door
alarm will sound.
• The door alarm will sound in 1 minute after opening the
door and again after 1 minute (once in each case).
• If the door is left open for approx. 3 minutes, the alarm
will sound continuously.
• Door alarm will stop once the refrigerator door closed.
Door Alarm
(only SJ-BW30P)
Coldest
normal
Coldest
Coldest
11