Sharp SJ-BA05DMXL1-UA, User Manual

Page: 8 / 28

EN -6-
CHAPTER -3: USING YOUR FRIDGE FREEZER
Display and control panel
Operating your fridge
Cooler temperature settings
• Initial temperature value for Cooler Setting Indicator is 6
o
C.
• Press set button once, the set value will start to blink.
• If you keep pressing set button, lower temperatures will be selected. (8, 6, 5, 4, 2, super and eco)
• If no button is pressed for 1 second, your choice will be set, it will blink 3 times. Buzzer will sound beep beep.
• The temperature value selected before Super Cool Mode or Economy Mode is activated will remain the same
when the mode is over or cancelled. The appliance continues to operate with this temperature value.
Super cool mode
How would it be used?
Press set button until super cool symbol will be seen on the screen. Buzzer will sound beep beep. Mode will be set.
During this mode:
• Economy mode can not be selected.
• Super cool mode can be cancelled by the same operation of selecting.
Economy mode
How would it be used?
Press set button until eco symbol will be seen on the screen. Buzzer will sound beep beep. Mode will be set.
During this mode:
• Super cool can be selected. Economy mode is automatically cancelled and the selected mode is activated.
• Eco mode can be cancelled by the same operation of selecting.
C o
8 6 5 4 2
Thermostat set level indicator
It is Economy mode
indicator.
It is Super cool
mode indicator.
Set
button Button
LED
Door Open Alarm Function
If either the fridge or freezer door is left open for more than 2 minutes, the appliance will beep.
Warnings About Temperature Adjustments
• It is not recommended that you operate your fridge in environments colder than 10°C.
• Temperature adjustments should be made according to the frequency of door openings, the quantity of food
kept inside the fridge and ambient temperature of the placement of your fridge.
• Your fridge should be operated up to 24 hours according to the ambient temperature without interruption after
being plugged in, this is so it is completely cooled. Do not open the doors of your fridge and do not place food
inside it during this period.
• A 5 minute delay function is applied to prevent damage to the compressor of your fridge, when you take the
plug out and then plug it back in again after an energy breakdown has occurred. Your fridge will start to operate
normally after 5 minutes.