20
ERROR CODES
When some malfunctions occur, the appliance will display error codes to warn you:
CODES
MEANINGS
POSSIBLE CAUSES
E1
• Longer inlet time
• Faucet is not opened, or water intake is restricted, or water pressure is
too low
• Improper or Incomplete Draining
• Drain Hose is extended more than 10 ft from Dishwasher
• Drain Hose is not properly looped underneath sink, or not installed
with Air Gap
• Drain Hose is kinked, compressed, or otherwise damaged
• Wrong Drain Hose used (use only supplied Sharp Dishwasher Drain
Hose)
E4
Overflow
Some element of dishwasher leaks
E8
Failure of orientation of distributary valve
Open circuit or break of distributary valve
E9
Holding a button for longer than 30 seconds Water or some other material on the button
WARNING
• If overflow occurs, turn off the main water supply before calling for service.
• If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.
INCORRECT
CORRECT - METHOD 1
AIR GAP WITH WASTE TEE OR DISPOSER
INCORRECT
CORRECT - METHOD 2
HIGH DRAIN LOOP WITH WASTE TEE OR DISPOSER
SHARP ELECTRONICS CORPORATION
•
100 Paragon Drive
•
Montvale, New Jersey 07645
•
USA
