18
E
E
OR
1
Select heater by touching ON keypad.
2
Use the Power Slider Bar selector to set power level.
3
Touch the TIMER +/- keypads; a tone will sound and the
Indicator Light Timer ON for the heater will blink. Use the
keypads to select desired time and touch ON again to accept.
4
Touch ON or wait 5 seconds for the power to be automatically
accepted and heater to begin heating.
5
A tone will sound and the Indicator Light Timer ON will
illuminate and remain on during the countdown. (If it is the
default timer countdown displayed, this light will blink.)
If using BRIDGE with the 2 left heaters, simply operate the
bridge function as instructed in the section BRIDGE HEATER
and select one of the TIMER keypads to set time as the heaters
will sync power and timer.
SET MULTIPLE TIMERS
Complete the steps for setting a single timer, and simply repeat
for the next desired heater.
SET AN INDEPENDENT TIMER
Simply select the +/- keypads and set a timer countdown. The
independent timer can be set even if the cooktop main power is
off (Control Lock must be deactivated). The independent timer
will continue to operate even if cooktop main power is turned
off. When setting the independent timer, a small red decimal
will flash at the bottom right corner of
the Timer Digital Display indicating that
this the independent timer is being set. It
will flash for 5 seconds, or until a heater
is selected.
When the timer countdown has completed, a tone will sound
(2 rapid succession beeps) and 00 will blink in the display for
1 minute or until any keypad is touched on the control panel.
SETTING A SINGLE TIMER
1
Select heater by touching ON keypad.
2
Touch the TIMER +/- keypads; a tone will sound and the
Indicator Light Timer ON for the heater will blink. Use the
keypads to select desired time and touch ON again to accept.
3
Use the Power Slider Bar selector to set power level.
4
Touch ON or wait 5 seconds for the power to be automatically
accepted and heater to begin heating.
5
A tone will sound and the Indicator Light Timer ON will
illuminate and remain on during the countdown. (If it is the
default timer countdown displayed, this light will blink.)
USING THE COOKTOP
