6
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION
NOTE:
If you are unsure how to connect your oven, please
consult an authorised, qualified electrician.
Neither the manufacturer nor the dealer can accept
any liability for damage to the oven or personal
injury resulting from failure to observe the correct
electrical connection procedure.
Water vapour or drops may occasionally form on
the oven walls or around the door seals and
sealing surfaces. This is a normal occurrence and is
not an indication of microwave leakage or a
malfunction.
Do not use metal utensils, which reflect microwaves
and may cause electrical arcing. Do not put cans
in the oven.
Use only the turntable designed for this oven.
Do not place anything on the outer cabinet during
operation.
Do not use plastic containers for microwaving if the
oven is still hot from using the
GRILL
,
CONVECTION
,
DUAL
and
AUTOMATIC
operation (except AUTO DEFROST), because they
may melt. Plastic containers must not be used
during above modes unless the container
manufacturer says they are suitable.
✓
Remove this film
1.
Remove all packing materials from the inside of the
oven cavity. Discard the loose polythene sheet from
between the door and cavity. Remove the feature
sticker, if attached, from the outside of the door.
2.
Check the oven carefully for any signs of damage.
3.
Place the oven on a flat, level surface strong
enough to support the oven’s weight plus the
heaviest item likely to be cooked.
4. The oven door may become hot during
cooking. Place or mount the oven so that
the bottom of the oven is 85 cm or more
above the floor. Keep children away
from the door to prevent them burning
themselves.
5. Do not allow the power supply cord to
run over any hot or sharp surfaces,
such as the hot air vent area at the top
rear of the oven.
6.
Ensure there is a minimum of free space above the
oven of 19 cm.
7.
Securely connect the plug of the oven to a
standard earthed (grounded) household electrical
outlet.
19 cm
R-875+885 English 3/18/02 8:59 AM Page 6