Sharp R-774AST, Operation Manual

Page: 17 / 28

ENGLISH
WEIGHT DEFROST FUNCTION
WEIGHT DEFROST
The microwave oven is pre-programmed with a timer and power levels so that foods such
as pork, beef and chicken can be easily defrosted. The weight range for this is from 100g –
2000g in 100g steps.
Follow the example below for details on how to operate this function.
Example: To defrost a meat joint weighing 1.2Kg using WEIGHT DEFROST .
Place the meat in a flan dish or alternatively a microwave oven defrost rack on the
turntable.
1. P ress the WEIGHT
DEFROST
button.
2. Enter the desired weight
by rotating the ENTRY
dial until the display
shows:
3. START/+30sec./
button to start
defrosting.
(The display will count down
through defrosting time)
OTHER CONVENIENT FUNCTIONS
- 3. Enter the cooking time by rotating the ENTRY dial until the display shows “20:00”
minutes.
- 4. P ress the MICRO.POWER button, P100 will appear in the LED display.
- 5. P ress the MICRO.POWER button once again or rotate the ENTRY d ial to select the
microwave power to P80.
- 6. START/+30SEC./ENTER button once more to con
- 7. Enter the cooking time by rotating the ENTRY dial until the display shows “5:00”
minutes.
- 8. START/+30sec./ENTER button to start cooking.
2. +30sec FUNCTION (Auto minute)
Direct start
You can directly start cooking on P100 microwave power level for 30 seconds by pressing
the
START/+30sec./ENTER button. The cooking process will start immediately and each
time the button is pressed this will increase the cooking time by 30 sec.
NOTE: The cooking time may be extended to a maximum of 95 minutes.
3. CHILD LOCK:
Use to prevent unsupervised operation of the oven by children.
a. To set the CHILD LOCK:
b. To cancel the CHILD LOCK:
In the stand-by mode, press STOP/CLEAR button for 3 seconds. There will be a long beep
denoting entering the children-lock state and the
indicator will illuminate together
with the current clock time. If the clock has not been set the display status will be as follows:
In the stand-by mode, press STOP/CLEAR button for 3 seconds. There will be a long "beep"
denoting that the lock is released.
MY-16
Press the
P ress the
ENTER
firm the setting. Press the