E – 5
: 0
The dots (:) will flash on
and off.
Clock Setting
Step
Procedure
Pad Order
Display
Press the CLOCK pad.
* To enter the present time of day e.g. 11:34 (AM or PM):
Press the CLOCK pad again.
Stop/Clear
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
Getting Started
Step
Procedure
Pad Order
Display
Plug the oven into a power point.
Ensure the oven door is closed.
SHARP MICRO-WAVE
OVEN will be displayed
repeatedly.
Press the STOP/CLEAR pad so that the
oven beeps.
Before Operating
* This oven is preset with the OPERATION GUIDE in English.
To assist you in programming your oven, the operation guide will appear in the display.
In this manual, the display of operation guide is abbreviated.
* You can get operation guide in English, Malay or Russian.
To change the language, see page E-22.
Only the dots will remain.
1
2
3
This is a 12 hour clock. If you attempt to enter an incorrect clock time (Ex. 13:45), ERROR will appear
in the display. Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1:45).
The clock of the oven works based on the frequency of power source. So it may gain or lose in some
area where the frequency varies. It is recommended that you should adjust the time occasionally.
If you wish to know the time of day during the cooking mode, press the CLOCK pad. As long as your
finger is pressing the CLOCK pad, the time of day will be displayed.
:
1 1 : 3 4
Enter the correct time of day by pressing
the numbers in sequence.
1 1 : 3 4
1
2
