5
Power Level
Press the
POWER LEVEL
key
Display
(Percentage)
•
If “P0” is selected, the oven will work with the
fan but no power. You can use this level to
remove the odour.
HIGH
x1
P100
x2
P90
MEDIUM HIGH
x3
P80
x4
P70
MEDIUM
x5
P60
x6
P50
MEDIUM LOW
(DEFROST)
x7
P40
x8
P30
LOW
x9
P20
x10
P10
x11
P0
Generally the following recommendations apply:
- (HIGH) used for fast cooking or reheating
e.g. for casseroles, hot beverages, vegetables etc.
- (MEDIUM HIGH) used for longer cooking of
dense foods such as roast joints, meat loaf and plated
meals, also for sensitive dishes such as sponge cakes.
At this reduced setting, the food will cook evenly
without over cooking at the sides.
- (MEDIUM) for dense foods which require a
long cooking time when cooked conventionally, e.g.
beef casserole, it is advisable to use this power setting
to ensure the meat will be tender.
- (MEDIUM LOW) to defrost, select this
power setting, to ensure that the dish defrosts evenly.
This setting is also ideal for simmering rice, pasta,
dumplings and cooking egg custard.
- (LOW) For gentle defrosting, e.g. cream
gateaux or pastry.
Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0 W in stand by mode.
1.
Press the
CLOCK
button
on
ce. The hour fi gure will fl ash and the clock indicator will illuminate.
2.
Rotate the
ENTRY
dial until the correct hour is displayed, the input time should be within 0-23.
3.
Press the
CLOCK
button, the minute fi gure will fl ash.
4.
Rotate the
ENTRY
dial until the correct minutes are displayed, the input time should be within
0-59.
5.
Press the
CLOCK
button to
confirm the time
. The icon “:” of the digital time will fl ash on the display and the
clock
indicator will disappear.
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will show "0:00".
• To check the time of day during a cooking process, press
the
CLOCK
button and the LED will display the time of
day
for 2-3 seconds. This does not aff ect the cooking process.
• In the process of clock setting, if the
STOP/CLEAR
button is pressed, the oven will go back to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show
"0:00" after the power is reinstated. If this occurs during cooking, the programme will be erased
, a
s will the
time of day.
P100/ P90
P60/ P50
P80/ P70
P40/ P30
P20/ P10
•
Press the
MICRO. POWER
button once, P100
will be displayed and at the same time the
microwave indicator and
power level
indicator
will illuminate on the display.
• Press
MICRO. POWER
or rotate the
ENTRY
dial to change the power level until the display
indicates the desired level.
• Press the
START/+30sec./ENTER
button to
confirm the setting, enter the cooking time
and then press the
START/ +30sec./ENTER
button again to start the oven.
• To check the power level during cooking, press
the
MICRO. POWER
button, the current power
level will be displayed for
3
seconds. The oven
will continue to count down although the
display will show
the power level.
BEFORE
OPERATION
SETTING THE CLOCK
MICROWAVE POWER LEVEL
Your oven has a 24 hour clock feature
. To set the clock:
