5
A40657, SCA R2498J O/M
OPERATION OF TOUCH CONTROL PANEL
The operation of the oven is controlled by pressing the appropriate pads arranged on the surface of the
control panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
Before Operating
•
The programme or check mode is cancelled when
any pads are not pressed for more than 3 min-
utes.
•
will appear on the display after the timer
reaches zero. It will disappear when the oven door
is opened or the STOP/CLEAR pad is pressed.
•
When you first connect the microwave oven to an
electrical socket, the digital display will show
.
•
Key pad entries can only be made when the door
is shut.
•
The oven lamp and cooling fan will continue to
operate for 1 minute after cooking or when the
door is opened.
Volume and Sound Setting
•
There are 3 preset volume levels of 2 different
sounds on your oven.
•
To set the volume and the sound, press the SET
pad twice within 2 seconds and then press the
SIGNAL pad continuously until you hear desired
volume and sound.
NOTE:
1. The volume will decrease as you press the SIGNAL
pad. After the lowest level, the volume will return to
the maximum level and the sound will change to
another one at the same time.
2. Any audible signals will not sound when the SET pad
is pressed first and then an audible signal will sound
when the SET pad is pressed secondly.
Stop/Clear
•
If you want to stop the oven during cooking:
1. Press the STOP/CLEAR pad once.
2. Open the door (except memory cooking).
To start the oven again, close the door and press
the START pad within 1 minute.
•
If you open the door during memory cooking, the
programme is cancelled.
•
If you want to cancel a programme during cook-
ing, press the STOP/CLEAR pad twice.
•
If you want to clear a mistake during program-
ming, press the STOP/CLEAR pad once.
•
This oven has 20 memory banks (1-20) which can
store cooking programmes.
•
The memory banks 1-0 have been programmed
previously as shown in the table. These prepro-
grammed memory banks can be changed indi-
vidually if required.
•
In addition for all memory banks a time constant
1.8 for the double quantity is stored. The stored
time constant can also be changed individually if
required.
•
Information in these memory banks is not lost due
to power interruptions. If the power goes off, the
oven does not need to be reprogrammed. No bat-
teries are necessary for this type of memory.
•
If you want to cook using memory 11-20, press
the desired NUMBER pad twice within 1 second.
MEMORY OPERATION
Output Power
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
Cook Time
10 sec.
20 sec.
30 sec.
45 sec.
1 min.
1 min. 15 sec.
1 min. 30 sec.
2 min.
2 min. 30 sec.
3 min.
Memory No.
1
2
3
4
5
6
7
8
9
0
To check the stored programmes please refer to
"Memory check" on page 9.
To change the stored programmes please refer to
"Memory programme entry" on pages 6-8.
SCA R2498J O/M,01-10
03.10.27, 4:10 PM
5
