Sharp R-230AM, Operation Manual With Cookbook

Page: 10 / 36

BASIC OPERATION
8
Example:
Suppose you want to heat soup for 2 minutes and 30 seconds on 70P microwave power.
Your oven can be programmed for up to 90 minutes.
(90.00) The input unit of cooking (defrosting) time
varies from 10 seconds to five minutes. It depends on
the total length of the cooking (defrosting) time as
shown on the table.
Cooking time Increasing unit
0-5 minutes 10 seconds
5-10 minutes 30 seconds
10-30 minutes 1 minute
30-90 minutes 5 minutes
Enter desired cooking
time by rotating
TIME /
WEIGHT dial clockwise.
Choose desired power. 70P
will appear on the display. Press AUTO MINUTE
/START button
once to begin cooking.
Auto Minute
/Start
x1
NOTE:
1. When the door is opened during the cooking process, the cooking time on the digital display stops
automatically. The cooking time starts to count down again when the door is closed and the AUTO
MINUTE /START button is pressed.
2. If you wish to know the power level during cooking, press the POWER LEVEL button. As long as your
finger is touching the POWER LEVEL button, the power level will be displayed.
3. You can rotate the TIME/WEIGHT dial clockwise or counter-clockwise. If you rotate the knob counter-
clockwise, the cooking time will decrease from 90 minutes by units of time.
Time/Weight
KG
TURN STIR PCS MICRO COOK KG
TURN STIR PCS MICRO COOK
KG TURN STIR PCS MICRO COOK
Power Level
x2
MULTIPLE SEQUENCE COOKING
1st Stage
2nd Stage
Example:
Suppose you want to cook rice for 5 minutes on 100P microwave power and then for 16 minutes on 30P power.
Input the time
(5 min.) Input the
power 100P Input the time
(16 min.) Input the
power 30P
Start
A sequence of maximum 3 stages, consisting of manual cooking time and mode, can be set.
.
R-232M O/M&C/B 11/6/99 11:44 am Page 8