Sharp R-22AT, Operation Manual

Page: 9 / 33

8
NUMBER POWER
ON
%
1
CHANGING THE TIMING REQUIRED BY THE MAGNIFICATION FACTOR FOR DOUBLE QUANTITY
The magnification factor for double quantity is preset 1.8 times the single quantity cooking time, but you
can alter this constant to suit your needs if the food needs more or less cooking time.
* Example: If you want to change the magnification factor to 1.67 in memory 1.
Step
Action
1
2
Select set mode.
3
Press DOUBLE QUANTITY pad.
5
6
Press SET pad twice to complete the
setting.
Set the magnification factor (1.67).
Press pad Display
NUMBER
DOUBLE
NUMBER
NUMBER
DOUBLE
within 2 sec.
1
7
1
6
4
Press MANUAL/REPEAT pad.
NUMBER
DOUBLE
NUMBER
DOUBLE
Note: 1. In case you want to change the magnification factor it must be set for each key separately.
2. The magnification can be set from 0.00 to 9.99.
3. At step 1, the audible signal will not sound when the SET pad is pressed once but an
audible signal will sound when the SET pad is pressed twice.
COOKING WITH MEMORY
* Example: To cook using memory 1, which was programmed for 10 seconds at 100%.
Step 1
DISPLAY
* Example: To cook 2 servings by memory 1, (In this case the constant for double quantity is 1.8).
COOKING DOUBLE QUANTITY WITH MEMORY
Step 1 Step 2
DISPLAY
NUMBER POWER
DOUBLE ON
%
1
The programme will
start after 1 second.
Note: 1. If the cooking time of double quantity is over the max time (see page 10), the display will show "EE9".
2. Double quantity means best time for cooking double quantity; it is not double the time.
3. The "MEMORY" cooking system does not require the use of the START pad. MEMORY cannot be used
to start the oven if a program is already on display.
X 2
X 2
SET
DOUBLE
QUANTITY
SET
MANUAL /
REPEAT
Select memory number. 1
1
Select memory
number.
The programme will
start after 1 second.
DOUBLE
QUANTITY
Select double
quantity cooking
mode.
1
Select memory
number.
Downloaded from: http://www.usersmanualguide.com/