GB-6
ENGLISH
INSTALLATION INSTRUCTIONS
ACCESSORIES
Check to make sure the following accessory is provided:
• Operation manual
• Caution Sheet (SPECIAL INSTRUCTIONS AND WARNINGS : part code TCAUHA429WRRZ,
TCAUHA430WRRZ and TCAUHA445WRRZ)
NOTE:
• When you order accessories, please mention the two items : part name and model name to your dealer or
SHARP authorized service agent.
• The model name is printed on the door of the microwave oven.
WARNING :
Always keep the caution sheet (SPECIAL INSTRUCTIONS AND WARNINGS) close to the oven
for your reference.
6-6)Remove the screw (a) holding the mounting plate
B to the rear cabinet of the oven B. And remove
the mounting plate B from the oven B. See the
fi
gure A.
6-7)Install the screw (a) to its position again.
6-8)Remove the screw (c) from the oven A.
6-9)Remove the screw (d) from the oven B.
6-10)Turn the removed mounting plat B over and then
using the removed screw (c) and (d), attach the
mounting plate B, as shown in the
fi
gure A.
WARNING:
In case where two ovens are installed together by
placing one on top of another.
1) Use the two mounting plates for
fi
xing the two
ovens.
2) Make sure that the power supply cord is not caught
between the two ovens.
3) Do not install more than one oven on top of another.
4) Do not lose the removed screws.
Screw (a)
Screw
Mounting Plate A
Screw (b)
Screw (a)
Oven B
Screw (c)
Rear cabinet
Mounting Plate B
Oven A
(d)
Rear cabinet
1) Remove all packing materials from the inside of
the oven cavity. Remove all the blue protective
fi
lm from the outside of the oven.
2) Check the oven carefully for any signs of damage.
3) Place the oven on a
fl
at, level surface strong
enough to support the oven's weight plus the
heaviest item likely to be cooked.
Do not place this oven in a position which is not easily
accessible. To position the oven too high can be dan-
gerous because food can not be removed safely.
4) Ensure there is a minimum free space above the
oven of 25 cm.
25 cm
5) Securely connect the plug of the oven to a standard
earthed (grounded) household electrical outlet.
6) Two same oven models can be installed together by plac-
ing one on top of another. Follow these instructions.
6-1)Place the oven A and position the oven B on top
of the oven A as shown in the
fi
gure A.
6-2)Remove the single screw (a) holding the mount-
ing plate A to the rear cabinet of the oven A. And
remove the mounting plate A.
6-3)Remove the single screw (b) from the rear cabinet
of the oven B, as shown in the
fi
gure A.
6-4)Reinstall the mounting plate A to the rear cabinet
of the oven B with the single screw (b) removed,
as shown in the
fi
gure A.
6-5)Hold the mounting plate A to the rear cabinet of
the oven A with the single screw (a), as shown in
the
fi
gure A.
Figure A: How to
fi
x two ovens
NOTE
1. If you are unsure how to connect your oven, please
consult an authorized quali
fi
ed electrician.
2. Neither the manufacuture nor the dealer can accept
any liability for damage to the oven or personal
injury resulting from failure to observe the correct
electrical connection procedure.
3. Water vapour or drops may occasionally form on
the oven walls or around the door seals and sealing
surfaces. This is a normal occurrence and is not
an indication of microwave leakage or a malfunc-
tion.
R23AM_OM_NORDIC_5_GB_SE_NO_FI_DK6 6
R23AM_OM_NORDIC_5_GB_SE_NO_FI_DK6 6
2013-12-02 11:12:53
2013-12-02 11:12:53