Sharp R-21LCF - Oven Microwave 1000 W, Operation Manual, Page: 10 / 24

9
NO.
X2 NO.
NO.
Memory program entry
You can change memory programs for memory
banks. See time cooking on page 11.
R-21LTF
Memory banks 20
Cooking stage
Memory NO.1 -10 max. 3 stages
Memory NO. 11-20 max. 2 stages
R-21LVF
Memory banks 10
Cooking stage 1 stage
The R-21LVF can be programmed only using 100%
power. Follow steps 1,2,3 and 7 below.
Setting time and power level
* Suppose you want to set 4 minutes at 60% for the
1st stage and 2 minutes at 30% for the 2nd stage
for 1 serving in memory 1. (R-21LTF)
Note: 1. (For R-21LTF)
If you want to set memory 11-20, press
the desired number pad twice.
2. If the cooking time is over the maximum
time, the display will show “EE 9”. See
page 11.
3. At step 1, no audible signal will be heard
when the SET pad is touched the fi rst
time. An audible signal will sound when
the SET pad is touched the second time.
Setting magni fi cation factor
Ovens are shipped with a magni fi cation factor of 1.7
for DOUBLE QUANTITY.
You can change the magni
fi cation factor for double
quantity and have it stored in the memory.
* Suppose you want to set the magni fi cation factor to
1.67 for double quantity in memory 1.
1 Touch SET pad twice
within 2 sec.
2 Touch DOUBLE
QUANTITY pad.
3 Touch number pad 1.
4 Touch SELECTATIME
pad.
5 Touch NUMBER pads
1,6 and 7.
6 Touch SET pad twice.
Procedure Display
SET
x 2
1
NO. X2
SELECTATIME
Note: 1. In case you want to change the magni fi ca-
tion factor it must be set for each pad
separately.
2. The magni fi cation factor can be set from
0.00 to 9.99.
3. At step 1, no audible signal will be heard
when the SET pad is touched the fi rst time.
An audible signal will sound when the SET
pad is touched the second time.
SET
x 2
X2
X2
DOUBLE
QUANTITY
1 6 7
1 Touch SET pad twice
within 2 sec.
2 Touch number pad.
3 Enter cooking time for
1st stage.
4 Enter power level in
1st stage.
5 Enter cooking time for
2nd stage.
6 Enter power level for
2nd stage.
7 Touch SET pad twice.
Procedure Display
6
1
x 2
SET
SELECTAPOWER
NO.
2 0 0
SELECTATIME
3
SELECTAPOWER
SET
x 2
SELECTATIME
4 0 0