6
INSTALLATION
• This appliance has been tested and approved for use near domestic gas, electric and induction hobs only.
• Sufficient space between hob and microwave should be allowed to prevent overheating of microwave
oven, surrounding cupboard and accessories.
• Do not operate the hob without pans
when the microwave oven is operating.
• The cupboard must be a minimum of
500 mm (A) above the worktop and
must
not
be installed
directly
above a
hob or other kitchen appliance e.g.
conventional oven or refrigerator.
• Care should be taken when attending to
the microwave oven while the hob is on.
• The front of the oven can be cleaned
with mild soap and water.
Do not use commercial oven cleaners,
abrasive harsh cleaners, or those that
contain Sodium Hydroxide.
A
A
SAFE USE OF THE APPLIANCE
INSTALLING THE APPLIANCE
1. Remove all packaging and check carefully for
any signs of damage.
2. Fit the appliance into the kitchen cupboard
slowly, and without force, until the front frame of
the oven seals against the front opening of the
cupboard.
3. Ensure the appliance is
stable and not leaning.
Ensure that a 5mm gap is
kept between the
cupboard door above
and the top of the frame
(see diagram).
4. Fix the oven in position with the
screws provided.
The fixing points are located
on the top and bottom
corners of the oven (see
diagram, item 9, on page 2).
5. It is important to ensure that the installation of
this product conforms to the instructions in this
operation manual and the hob manufacturer’s
installation instructions.
5 mm
R-21+22FBST ENGLISH 22/07/2003 11:41 Page 6