EN - 21
9. Extra Dry Touch Button
Press the Extra Dry touch button to add
extra drying steps to a program in order to
obtain drier dishes. This option increases
water temperature of the final rinse step
and duration of the drying step.
NOTE:
If an option is not compatible
with the selected program, a buzzer
sounds.
NOTE:
If an extra feature has been
used on the most recent wash program, this
feature will remain active on the next
selected program. To cancel this feature on
the newly selected wash program, press
the feature button until the light on the
button switches off.
10. Salt lack warning indicator
When there is insufficient softening salt, the
Salt Lack Warning Indicator will illuminate to
indicate the salt chamber needs filling.
11. Rinse Aid lack warning indicator
When there is insufficient rinse aid, the
Rinse Aid Lack Warning Indicator will
illuminate to indicate the rinse aid chamber
needs filling.
NOTE:
If you decide not to start the
selected program, please see the
"Changing a Program" and "Cancelling a
Program" sections.
7.1 Changing a Program
Follow the steps below to change a
program while in operation.
1.
Open the door and press the Program
touch button (
2
) to select a new
program. If the door is opened during
operation, the time remaining of the
selected program will show on the
display (
3
).
2.
After closing the door, the newly
selected program will resume the
course of the old program.
NOTE:
Open the door slightly at first
to stop a wash program before it is
complete in order to avoid water spillage.
7.2. Cancelling a Program
Follow the steps below to cancel a
program while in operation or in standby
mode.
1.
Open the door of the machine, the most
recently selected program will be shown on
the display.
2.
Press and hold the Program touch button
(2) for 3 seconds. At the end of 3 seconds,
'1' will show on the Display (3).
3.
The water discharge process will start
after the door of the machine is closed
and will continue for 30 seconds. When the
program is cancelled, a buzzer will sound 5
times.
NOTE:
When the door is opened after
the selected wash program is complete, a
buzzer will sound and ‘0’ will be shown on
the Display (
3
).
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(9)
(8)
(11)
(10)
7.3. Switching the Machine Off
When the selected wash program is
complete, a buzzer will sound 5 times. You
can then turn your machine off by using the
On/Off touch button (
1
).
NOTE:
Do not open the door before a
program is complete.
NOTE:
Leave the door of your
machine slightly open at the end of a wash
program to speed up drying.
NOTE:
If the door of the machine
is opened or the power is cut off while a
program is in operation, the program will
continue when the door is closed or the
power returns.
NOTE:
If the power is cut or the
machine door is opened during the drying
process, the program will terminate. Your
machine will now be ready for a new
program selection.
