EN-10
CHAPTER -3: INSTALLING THE MACHINE
Warning:
When a drain hose longer than 4 m is used, the dishes might remain
dirty. In that case, Sharp will not accept responsibility.
Electrical connection
The earthed plug of your machine should be connected to an earthed outlet
supplied by suitable voltage and current. If there is no earthing installation, have
a competent electrician to carry it out. In case of usage without earthing installed,
our company will not be responsible for any loss of usage that might occur. The
indoor fuse current value should be 10-16 A. Your machine is set according to
220-240 V. If the mains voltage in your location is 110 V, connect a transformer of
110/220 V and 3000 W inbetween. The machine should not be plugged in during
positioning.
Always use the coated plug supplied with your machine. Running in low voltage
will cause a decline in washing quality. The machine’s electrical cable should
be replaced by an authorised electrician only. Failure to do so may lead to acci-
dents. For safety purposes, we recommend that you disconnect the plug when
the machine is not going to be used for an extended period of time. In order avoid
electric shocks, do not unplug when your hands are wet. When disconnecting
your machine from the mains supply, always pull from the plug. Never pull the
cord itself.
