Sharp PW-E410, Operation Manual

Page: 43 / 51

41
Using the Converter function
The Converter function consists of two converters: the Currency converter, and the
Metric converter.
Currency converter (Währungsumrechner)
Setting a currency rate
One conversion rate can be set.
<Example>
Set the following rate: C
= 1 = US$ 1,2
1. Press
m 8 1
to access the
Currency converter.
2. Press
<
. The input fields for the currency
name and rate appear.
3. Use the
{ }
keys to place the cursor at
the desired input field, then input the
currency name and its rate. In this example,
press
}
and input ‘1,2’.
• The currency name field of currency
converter is temporarily pre-defined, as
seen in the above example.
• When inputting the desired currency name, press
^ b
to clear the
input field and use no more than four letters. Use the
[ ]
keys to set the
cursor on the left/right of the currently selected input field.
• In the left input field, enter the base currency name. In the input field on the
right, place the currency name of which you wish to set the conversion rate.
• Up to 10 digits (excluding the decimal point) can be entered in the currency
rate input field.
4. Press
e
. The currency name and its
rate are set.
Converting currencies
The conversion calculation can be performed using the previously set conversion
rate.
<Example>
Convert C
= 180 to US$ when setting the rate: C = 1 = US$ 1,2.
1. Press
m 8 1
to display the currency
converter.
2. Input ‘180’. You may input a simple formula,
such as ‘36
×
5 =’, instead.