37
E
RS-232C command table
How to read the command table
Command:
Command field (See page 33.)
Direction:
W When the “Parameter” is set in the parameter field (see page 33), the command functions as described
under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting “????”, “
?” or “???+”
(repeater control) in the parameter field (see page 33).
Parameter:
Parameter field (See page 33.)
Reply:
Response (Returned value)
* :
“●” indicates a command which can be used in power standby mode regardless of the STANDBY MODE setting.
“○” indicates a command which cannot be used in power standby mode when STANDBY MODE is set to LOW POWER.
“–” indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting.
Power control/Input mode selection
Function
Command
Direction
Parameter
Reply
Control/Response contents
*
POWER CONTROL
POWR
W
0
Switches to standby mode.
●
1
Returns from standby mode.
R
0 Standby mode
1
Normal mode
2
Input signal waiting mode
INPUT MODE SELECTION
INPS
W
0
Toggle change for input mode. Terminals not selected in INPUT SELECT cannot
be selected.
●
1
DVI-I
2
D-SUB[RGB]
“ERR” when other than RGB is selected for D-SUB of INPUT SELECT.
3
D-SUB[COMPONENT]
“ERR” when other than COMPONENT is selected for D-SUB of INPUT SELECT.
4
D-SUB[VIDEO]
“ERR” when other than VIDEO is selected for D-SUB of INPUT SELECT.
9
HDMI1[AV]
“ERR” when PC is selected for HDMI1 of INPUT SELECT.
10
HDMI1[PC]
“ERR” when AV is selected for HDMI1 of INPUT SELECT.
12
HDMI2[AV]
“ERR” when PC is selected for HDMI2 of INPUT SELECT.
13
HDMI2[PC]
“ERR” when AV is selected for HDMI2 of INPUT SELECT.
14
DisplayPort
R
1
DVI-I
●
2
D-SUB[RGB]
3
D-SUB[COMPONENT]
4
D-SUB[VIDEO]
9
HDMI1[AV]
10 HDMI1[PC]
12
HDMI2[AV]
13
HDMI2[PC]
14 DisplayPort
Controlling the Monitor with a PC (RS-232C)
