manualshive.com logo in svg

Sharp PN-K321, Service Manual

Share
Download
Sharp PN-K321 Service Manual Download Page 42

PN-K321/K322B SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4

 - 10 

 

Reput USB Flash Drive or there is OFF-ON of power supply, 

and carry out again. 

 

 

 

 

 

7 ) Even if it carries out repetition implementation, when you fail, 

exchange USB Flash Drive 

 

■

USER SETTING VALUE RESTORE 

 

1) If cursor is united with [RESTORE] of the following menu and   

press [ENTER] button, 

 

 

 

 

 

 

 

2) The list of the files saved at the USB Flash Drive is displayed. 

If select the file name to restore and press [ENTER], restoration 

will begin. Don't extract a USB Flash Drive during writing. 

 

 

 

 

 

 

 

3) After completion of restoring, the information display is reset 

 

■

ERROR MESSAGE 

- Could not save. Drive has no free memory. 

There is only no availability which saves a log at USB Flash Drive 

- USB not recognized. Check the connection. 

USB cannot be recognized (mount failure) 

- Failed to save file. 

The format of USB Flash Drive is outside correspondence 

The file name which it tries to write in overlaps 

Writing is not made by write-protection etc. 

Abnormalities occur at the time of other writing 

- Cannot find file 

When a file does not find one 

- Restoring has failed. 

When the data of a file which it tried to read is inaccurate and it is 

or file reading failure 

- Restoring has failed. System will be restarted 

When it fails in the middle of restoration processing 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for PN-K321












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands