background image

ENGLISH

3

E

 20.   Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, 

severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and 

missile launch control in a weapon system.

 21.   Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in 

 

low-temperature burns.

 22.   Do not modify this product.

 23.   To prevent fire or shock hazard, do not expose this product to dripping or splashing. 

 

No objects filled with liquids, such as vases, should be placed on the product.

 24.   This product must only be connected to a 100-240V, 50/60Hz, grounded (3-prong) outlet.

WARNING:

1) This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may 

be required to take adequate measures.

2) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

3) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

4) An apparatus with CLASS I construction shall be connected to a MAIN socket outlet with a protective earthing connection.

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: HDMI input terminal, 

D-sub input terminal, and RS-232C input terminal.

If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, 

particularly to children, can be avoided by taking simple precautions such as:

• Using fixing devices like wall mount brackets recommended by the manufacturer.

• Only using furniture that can safely support the monitor.

• Ensuring the monitor is not overhanging the edge of the supporting furniture.

•  Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the 

monitor to a suitable support.

• Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the monitor or its controls. 

Especially for child safety

- Don’t allow children to climb on or play with the monitor.

- Don’t place the monitor on furniture that can easily be used as steps, such as a chest of drawers.

-  Remember that children can become excited while watching a program, especially on a “larger than life” monitor. Care 

should be taken to place or install the monitor where it cannot be pushed, pulled over, or knocked down.

-  Care should be taken to route all cords and cables connected to the monitor so that they cannot be pulled or grabbed by 

curious children.

SAFETY PRECAUTIONS (Continued)

IMPORTANT SAFETY INSTRUCTIONS

 1)  Read these instructions.

 2)  Keep these instructions.

 3)  Heed all warnings.

 4)  Follow all instructions.

 5)  Do not use this apparatus near water.

 6)  Clean only with dry cloth.

 7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

 8)   Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that 

produce heat.

 9)   Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider 

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are 

provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the 

obsolete outlet.

 10)   Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point 

where they exit from the apparatus.

 11)   Only use attachments/accessories specified by the manufacturer.

 12)   Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

 13)   Unplug this apparatus during lightning storms or when unused for long periods of time.

 14)   Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any 

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the 

apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Summary of Contents for PN-C703B





























Reviews: