Sharp PN-655E, Operation Manual

Page: 56 / 252

54
E
Specifications
■
Product Specifications
Model PN-655E
LCD element 65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD
Max. resolution (pixels) 1920 x 1080
Max. colours 16.77 M colours (8 bits/colour)
Pixel pitch 0.744 mm (H) x 0.744 mm (V)
Viewing angle 170° right/left/up/down (contrast ratio ≥10)
Screen active area mm 1428 (H) x 804 (V)
Computer Video Analogue RGB (0.7Vp-p) [75Ω], Digital (DVI 1.0 standard-compliant)
input Sync
Horizontal/Vertical separate (TTL: positive/negative), Sync-on-green,
signal
Composite sync (TTL: positive/negative)
Plug and play VESA DDC2B
Power management VESA DPMS, DVI DMPM
Video colour system
PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)
Input terminals Computer signal Analogue Mini D-sub 15 pin (3 rows) x 1
Digital DVI-D 24 pin x 1
Computer audio 3.5 mm mini stereo jack x 1
RS-232C D-sub 9 pin x 1
Composite video BNC x 1
Component BNC (Y, Cb/Pb, Cr/Pr) x 1
Audio RCA pin (L/R) x 1
Output terminals Computer signal Digital DVI-D 24 pin x 1
RS-232C D-sub 9 pin x 1
Audio RCA pin (L/R) x 1
Speaker 10 W + 10 W [6Ω]
Installation mm Secured at 4 points (pitch: 650(V), 440(H))(M10 screws)
Power requirement AC 100V - 240V, 50/60Hz
Power consumption 550 W (2.0 W in input signal waiting mode, 2.0 W in standby mode)
Surrounding Operating temperature range 0°C to 40°C
environment Operating humidity range
20% to 80% (no condensation)
Dimensions (monitor unit only) mm Approx. 1,572 x 126 x 923 (excluding protrusions)
Weight kg Approx. 65 (excluding the temporary stand)
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product imporovement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.