Sharp PN-425, Operation Manual

Page: 18 / 76

16
E
DPMS: Display Power Management Signaling
DPMS Screen
Power
consumption Hsync Vsync
ON STATE Display 190 W Yes Yes
STANDBY
No
display
2.5 W
No Yes
SUSPEND Yes No
OFF STATE No No
Specifications
n
Product Specifications
Model PN-425
LCD element 42" wide (106.7 cm diagonal) TFT LCD
Max. resolution (pixels) 1366 x 768
Max. colors 16.77 M colors (8 bits/color)
Pixel pitch 0.681 mm (H) x 0.681 mm (V)
Viewing angle 178° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm) 36-5/8 x 20-9/16 (930.3 x 523.0)
Computer input signal
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω]
Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video color system PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)
Plug and play VESA DDC2B
Power management VESA DPMS, DVI DMPM
Input terminals PC Digital DVI-D 24 pin x 1
Analog Mini D-sub 15 pin, 3 rows x 1
BNC
*1
x 1
PC Audio 3.5 mm mini stereo jack x 1
Serial (RS-232C) D-sub 9 pin x 1
Composite video BNC x 1, RCA x 1
*2
S-video x 1
*2
Component BNC (Y, Cb/Pb, Cr/Pr) x 1
Audio RCA pin (L/R) x 2
Output terminals PC Analog
*3
Mini D-sub 15 pin, 3 rows x 1
Composite video BNC x 1
Audio RCA pin (L/R) x 1
Speaker 7 W + 7 W [6 Ω]
Power requirement AC 100 V - 240 V, 50/60 Hz
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption 190 W (Input signal waiting mode: 2.5 W, Standby mode: 1.5 W)
Dimensions inch (mm) Approx. 40-1/4 x 5-1/4 x 24-3/16 (1023 x 133 x 614) (excluding protrusions)
Weight lbs. (kg) Approx. 48.5 (22) (excluding cable clamp and cables)
*1 Does not support plug and play.
*2 The S-video input terminal, composite video input terminal (BNC), and composite video input terminal (RCA) cannot be used simultaneously.
*3 Through output of analog computer input signal. Does not support plug and play.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
n
Power management
This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in
order for the monitor’s power management function to work.
DMPM: Digital Monitor Power Management
DMPM Screen
Power
consumption
Monitor ON Display 190 W
Active OFF No display 2.5 W