Sharp Plasmacluster SJ-F800SPBK, Service Manual, Page: 39 / 64

SJF800SPSL
11 – 15
[5] WHEN LEFT AND RIGHT DOORS ARE NOT ON THE SAME LEVEL
1. Cause
The floor is not flat and refrigerator is slanting.
2. Adjustment
1. Unscrew 4 screws on the bottom of the cabinet,and remove the foot cover.
2. Adjust the adjustable feet as follows:
[When left door is raised]
1) Raise and then lower the both feet until they touch the floor.
2) Measure the height difference between right and left doors.
3) Extend the right adjustable foot until the left adjustable foot floats by the distance equal to the door level difference.
4) Several days are required until the both feet touch the floor and refrigerator seats stably.
5) If the height difference is not completely compensated, place a plate of the right thickness under the adjustable foot.
NOTE: When the right door is higher than the left door, extend the left adjustable foot.
Foot cover
Adjustable foot
3) Lower the foot
at
right
side.
1) Touch floor surface.
2) Check height difference.
3) Raise by the height difference
between doors.
Left door
is raised