Sharp Plasmacluster KC-30TX1, Operation Manual

Page: 44 / 76

Humidifying Filter / Humidifying Tray / Humidifying Tray Lid
About 30
〜
60 min. About 2 hours
State of dirt
Parts to be cleaned
Required chemical
Amount of use
How to wash
Duration
After soaking Rinse off detergent or citric acid thoroughly with water. (To avoid odor or the deformation/discoloration of the main unit)
Humidifying Filter / Humidifying Tray / Humidifying Tray Lid Humidifying Filter
Hard white mass Hard water stain or odor
Kitchen detergent (powder) Citric acid
Available at pharmacies or drug stores
Do not use cleaning substance with much bubble,
with strong odor, alkaline or acid cleaning substance.
Use the quantity of the detergent
described on the detergent.
Water or lukewarm water (approx. 40°C or less)
Approx. 6g per 1L of water
Soak
Soak
Caution
‡
The use of non-designated detergent could result in deformation, discoloration or cracks (water leakage).
‡ ,QVXIILFLHQWULQVLQJFRXOGUHVXOWLQWKHUHPDLQLQJRGRURIGHWHUJHQWRUFLWULFDFLGRUWKH
deformation/discoloration of the main unit.
‡ ,I\RXXVHWKHSURGXFWZKLOHZDWHUVFDOHRUZKLWHPDVVUHPDLQVZDWHUOHDNDJHPD\RFFXU
CARE and MAINTENANCE
(Continued)
When they are heavily dirty or odor bad
Water tank
Toothbrush, etc.
Sponge, etc.
Tank cap
Back panel
Soak for about 10 min.
Back panel
Approx. 60g per liter of water Amount of use
Dissolve commercially available sodium bicarbonate in water, and soak the Filter in the solution
for about 30 minutes.
After soaking and washing, give the filter a rinse sufficiently.
For persistent odor on the Humidifying Filter
E-18
WARNING
Pull out the plug
Be sure to power OFF
and unplug the unit prior
to care.
[Electric shock and/or injury could result]
Unscrew the Water Tank Cap and wash the inner
Water Tank and the Cap.
White mass could adhere to the rubber part of the
Water Tank Cap. Remove the dirt using a toothbrush
or similar tool.
Soak the panel in diluted kitchen
detergent.
Rinse off detergent thoroughly.
Dry the panel in the shade.