EN-10
OPERATION
LIGHT CONTROL
You can set the Cleanliness Monitor /
Plasmacluster Ion Light to OFF when their SIGN is
bright.
AUTO
DIM
OFF
1
2
(with the main unit ON)
• If the HAZE Button is not pushed within
8 seconds, the setting will be saved
automatically.
•
When the main unit starts operation, the
operation starts in the previous mode it was
operated in.
AUTO
Light automatically switches ON or OFF
based on room brightness.
Room is bright: light is ON
Room is dark: light is OFF
OFF
W
hen set to “OFF”, the “DIM” light
illuminates for 8 seconds after operation
starts and then the light turns off and the UV
Light becomes dark.
NOTE
CARE AND MAINTENANCE
To maintain optimum performance of this air
purifier, please clean the main unit including
the filter periodically.
Be sure to disconnect the power cord from
the wall outlet before performing any mainte
-
nance.
MAIN UNIT
•
Do not use volatile fluids
Benzine, paint thinner, polishing powder, etc., may
damage the surface.
•
Do not use detergents
Detergent ingredients may damage the main unit.
CAUTION
Wipe with a dry, soft cloth
For stubborn stains or dirt,
use a soft cloth
dampened with
warm water.
SENSORS
1. Remove the Catch Panel.
2. Remove the Dust Sensor Filter.
3. If it is very dirty, wash it with water and dry it
thoroughly.
Dust sensor filter
Dust sensor
Odor sensor
Odor sensor
Gently remove dust from the odor sensor,
using a vacuum cleaner attachment or
similar
tool.
more than
3 sec.
FP-JM40ELPVM_EN_MS_VI_ZH.indb 10
2019/04/08 10:56:20
