CAUTIONS FOR USE
1. If the electric fan is wrong operating, never repair by yourself. For safety and efficient use, contact your
nearest service center approved by SHARP.
2. In case the power cord is broken, it must be replaced by SHARP service center to avoid any damages.
3. Unplug every time before start to clean the parts or when you do not use the electric fan anymore.
4. Do not immerse the electric fan in water or sprinkling water because this could lead to a short circuit or
equipments broken.
5. Do not insert the finger or any objects through the grille while the blade is rotating.
6. Do not spray any vapor or chemicals to the electric fan while the blade is rotating.
7. Plug in tightly in order to avoid the plug to be overheated. This can cause the plastic to be melted,
and conflagrated. When unplugging, hold only the plug part, do not pull the cable as this may cause
the cable broken.
8. Never connect the plug with your wet hand as it may be dangerous from electric leakage.
9. While the electric fan is being used, do not plug in the other electric appliances in the same receptacle as
this might cause heat and conflagration respectively.
10. Should not use the electric fan close to curtain, mosquito net or any objects which could be pulled to the
motor, otherwise this may cause accident and damage.
11. Should not use the electric fan at the high temperature place such as placing it close to the stove or the high
humidity place, as the unit might be damaged.
12. Should not place the electric fan on the hot or sloped floor, as the unit might be damaged.
13. Do not use the electric fan with incomplete or broken parts such as grille or blade, as it may cause injury.
CLEANING AND MAINTENANCE
Unplug every time before start to clean the part.
Blade, Front grille and Rear grille
Disassemble, and wipe with damp cloth use cleaning agent mixed with water then dried up with the cloth.
Body
Wipe with damp cloth using water or mild soapy liquid.
Remark
Do not wet electric parts or motor.
Do not clean with chemical substance, thinner and kerosene etc, as this might damage the surface and / or shape
of unit.
4
