-6-
Troubleshooting
No wind
1.Not put through the power
2.Hasn't turn on the unit
3.The body is damaged
1.Insert the power cord by the correct
method
2.Press ON/OFF button to start up the
unit
3.Send it to maintenance center
Malfunction
Causes
Troubleshooting
No power
Can't turn
on the unit
There's
abnormal
sound
Can't change
the wind direction
No cooling
Air-in panel hasn't been
installed well
Malfunction of synchronous
motor
1.The strainer at the air inlet
is blocked
2.Water channel is blocked
3.Other causes
1.There's sediments inside
the unit
2.The impeller is loose
3.Malfunction of motor
The body is damaged
Install the air-in panel tightly
1.Remove filter and then take
out the sundries
2.Send it to maintenance center
3.Send it to maintenance center
1.Clean the filter at the water inlet
2.Clean the water channel
3.Send it to maintenance center
Send it to maintenance center
Send it to maintenance center
1.During operation, prohibit opening the ice pack cover or
consuming the gel in ice pack is strictly prohibited.
2.Put the ice pack in the freezer to freeze for about 4h,
and then put 2 packs into the water tank (add water inside
water tank before putting the ice box in water tank).
3.The ice pack will reduce the water temperature and
produce cool air flow.
5.Please make sure to insert the ice pack at the designated location to prevent
damage to the water pump.
ice pack
Operation Instruction for Ice Pack
-7-
(6)Wash the water tank, filter of water tank, evaporator and filter of evaporator
with clean water, and then reinstall them correctly and securely.
Evaporator
Filter of
evaporator
Filter of
water tank
(7)Put the evaporator at the appointed position of the unit. Otherwise, it may
affect the normal operation and service life. (even the motor may be burnt out)
(8)When moving the unit, please check whether there's water inside water tank.
If yes, please drain the water out completely.
Note: Prohibit tilting and pulling the unit when there's water inside water
tank to prevent water overflow.
Filter of water tank
Fig 4
Fig 5
Fixed rack of evaporator
Filter of evaporator
30mins to dry the evaporator. Cover the unit with plastic bag, and then put it
carton box for storage.
6.Cleaning: When the unit has been operated for a long time, water tank, filter of
water tank, evaporator and filter of evaporator will be blocked by sediment
and the air volume and cooling effect will be decreased. It is recommended
to clean them every two weeks.
Cleaning method:
(1)Pull out power plug from wall power socket.
(2)Press the clasp of panel with both hands, and then open the air intake panel
(see fig 1).
(4)Draw out water tank (see fig 3), and then remove the filter of water tank (see
fig 4).
(5)Remove the filter of evaporator, and then remove the evaporator (see fig 5).
(3)Unlock the water tank by turning the lock clockwise.
4.The equipped ice packs can be used repeatedly by rotating 2 packs in use and
2 packs standby in frozen condition.
