6.If it needs to be stored or transported, drain out the water,
operate at normal wind mode for approx. 30 mins to dry up
the evaporator and then pack the unit.
7.When the unit will not be used for a long time, please pull
out the power plug to prevent damage to the unit.
8.If the supply cord is damaged, it must be replaced by the
manufacturer, its authorised service agent to avoid hazard.
9.The unit is with humidifying effect; please do not operate
the unit in enclosed environment. If you operate the unit in
enclosed environment, please turn off humidifying and
cooling function.
10.When water level is lower than the minimum water level,
please add water in time.
11.This appliance is not intended for use by persons
(including children)with reduced physical, sensory or
mental capabilitiesor lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure
that they do not play with the appliance.
12.Note:Before maintenance or disassembling the outer case,
the unit must be disconnected with the power supply.
.
-2-
Standby: Once the unit is turned on, all indicators will be on for 1 second.
Then, the unit will enter standby status.
ʒ
ON/OFF button: Press this button to turn on the unit under standby mode. The
default working status is level 1 normal wind; Press this button again to turn off
the unit.
ʔ
Fan Speed button: Under working status, press this button to set fan speed.
Press this button repeatedly to select fan speed circularly.
ʕ
Wind Mode button: Press this button under working status to select fan mode.
Press this button continuously to select fan mode circularly in the sequence of:
natural wind
ĺ
sleeping wind
ĺ
normal wind. There's no icon for general wind.
If selecting natural wind or sleeping wind, corresponding icon will be turned on.
ʓ
Air swing button: under working status, press this button to select air swing.
Pressing this button repeatedly can select fan mode circularly.
When swinging, the corresponding icon will light up.
ʗ
Cooling button: Press this button once under working status to start up
cooling function. Water pump will start working and cool indicator is on.
Press this button again to stop cool function. Water pump stops operation and
cool indicator will be off.
ʘ
Light button: Press this button for the first time and all indicators light will be
turned off; press this button again and indicator light will be turned on.
-3-
Product Features
13.Unplug the appliance during water filling and cleaning.
14.Ensure that the unit is switched off from the supply mains
before removing the guard.
15.This product is only for household use.
ʖ
Timer button:
Timer off function: Press this button under working status to set timer off
function. Press this button continuously to set timer off time circularly in the
sequence of 1h
ĺ
2h
ĺ
3h
ĺ
……
ĺ
15h.
Timer on function: Press this button under standby status to set preset on
function. Press this button continuously to set preset on time circularly in the
sequence of 1h
ĺ
2h
ĺ
3h
ĺ
……
ĺ
15h. When preset on time is reached, preset
indicator is off and the fan will be turned on automatically. The defaulted preset
working status is low speed, normal wind, 2h timer off and air swing.
ʗ
