Sharp PGF310X - Notevision XGA DLP Projector Operation Manual Download Page 61

Page: 61 / 76

Appendix

Storing the Projector

Info

How to Use the Storage Case

When storing the projector, attach the lens cap
to the lens, and place it in the supplied storage
case.

Open the cover of the storage
case.

• Ensure the projector has cooled down

sufficiently before placing it in the case.

• When you place the projector into the

storage case, make sure that the
cooling fan has stopped.

• Ensure the lens cap is attached to the

lens for protection.

•

Place the projector into the storage
case with the lens facing the handle.

• Ensure the projector is held in place by

using the fixing band.

• Do not expose the storage case to

direct sunlight or near heat sources. The
storage case may change color or
become deformed.

Close the cover of the storage
case.

Place the projector into the stor-
age case.

Place the accessories in the front
pocket of the storage case.

Lens cap

Fixing band

Supplied accessories
(Rremote control, etc.)

Summary of Contents for PGF310X - Notevision XGA DLP Projector













































































Search results

Summary of Contents for PGF310X - Notevision XGA DLP Projector

Reviews:

Related manuals for PGF310X - Notevision XGA DLP Projector

Brands by name

Popular brands

Sharp PGF310X - Notevision XGA DLP Projector, Operation Manual

Search results

Summary of Contents for PGF310X - Notevision XGA DLP Projector

Reviews:

Related manuals for PGF310X - Notevision XGA DLP Projector

Brands by name

Popular brands