Sharp PG-F320W - Notevision WXGA DLP Projector, Service Manual

Page: 17 / 144

PG-F320W
1 – 10
Regarding the Lamp (Continued)
Removing and Installing
the Lamp Unit
• Make sure that you remove the lamp unit by
the handle. Do not touch the glass surface of
the lamp unit or the inside of the projector.
•
lamp, make sure you carefully follow the steps
below.
• Do not loosen other screws except for the
lamp unit cover and lamp unit.
Press STANDBY/ONon the projec-
tor or STANDBYon the remote
control to put the projector into
standby mode.
• Wait until the cooling fan stops.
Warning!
• Do not remove the lamp unit from the projec-
tor right after use. The lamp and parts around
the lamp will be very hot and may cause burns
or injury.
Disconnect the power cord.
• Unplug the power cord from the AC
socket.
• Leave the lamp until it has fully cooled
down (about 1 hour).
Remove the lamp unit cover.
• Turn the projector over. Loosen the user
service screw ( ) that secures the lamp
unit cover. Remove the lamp unit cover
(
).
Lamp unit
AN-F310LP
Info
Optional
accessory
AC socket
User service screw
(for lamp unit cover)
1
2
3
STANDBY/ON button
1
1
2
2
To avoid injury to yourself and damage to the