XR-32S-L/XR-32X-L/PG-F212X-L
2 – 2
Check items
No.
Adjusting point
Adjusting conditions
Adjusting procedure
1
R/G/B brightness adjustment
1. Select items as follows.
Group: CONFIRM/AD
Adjustment item: R-BRIGHT
G-BRIGHT
B-BRIGHT
(Process gamma interlocking)
1. Confirm the fixed value.
Fixed value: 125
2
Component offset adjustment
1. Input the 10-step signal of 480P
component 100% amplitude.
2. Select items as follows.
Group CONFIRM/AD
Adjustment item: C-R-OS
C-B-OS
(Process gamma interlocking)
1. Confirm the fixed values.
C-R-OS: 260
C-B-OS: 260
3
DLP brightness adjustment
1. Select items as follows.
Group CONFIRM/DLP
Adjustment item: R-BLK
G-BLK
B-BLK
(Process gamma interlocking)
1. Confirm the fixed value.
Fixed value: 252
4
Video contrast adjustment
1. Input the NTSC 100% window pattern signal.
(Signal with burst)
2. Select items as follows.
Group: CONFIRM/VIDEO
Adjustment item: V-CONT
1. Confirm the fixed value.
Fixed value: 134
5
Video brightness adjustment
1. Input the NTSC100% window pattern signal.
(Signal with burst)
2. Select items as follows.
Group: CONFIRM/VIDEO
Adjustment item: V-BRIGHT
1. Confirm the fixed value
Fixed value: 68
6
Video TINT adjustment
1. Input the internal 8CH (Split color bar).
2. Select items as follows.
Group: CONFIRM/VIDEO
Adjustment item: V-HUE
1. Confirm the fixed value.
Fixed value: 128
7
Video color saturation adjustment
1. Select items as follows.
Group: CONFIRM/VIDEO
Adjustment item: V-COLOR
1. Confirm the fixed value.
Fixed value: 139
8
RGB gradation repeatability
adjustment
1. Input the SMPTE pattern.
1. Confirm that the gradations of 100% and 95% of
white and 0% and 5% of black are observed.
9
Video white balance adjustment
1. Input the 50% gray pattern signal.
2. Select items as follows.
Group: CONFIRM/VIDEO
Adjustment item: V-R-OS
V-G-OS
V-B-OS
1. Confirm the fixed values.
V-R-OS: 123
V-G-OS: 123
V-B-OS: 123
10
Confirmation and readjustment of
white balance
1. RGB input, sRGB input, video input,
DTV input and DVD input
1. Confirm that there is no discrepancy between the
monitor unit and the white balance.
11
Confirmation of off timer operation 1. Select items as follows.
Group: CONFIRM/CHECK
Adjustment item: TEMP-OFF
1. Confirm that the off timer starts counting from 5
minutes and 1 minute is counted as 1 second and
the setting is turned off when 0 minute is displayed.
12
Confirmation of thermistor
operation
1. Carry out heating with dryer.
1. Confirm that TEMP is displayed.
13
Auto-sync operation
1. Receive the phase confirmation pattern.
1. In the VGA/SVGA/XGA/SXGA/UXGA mode,
confirm that Clock, Phase, H-POS and V-POS can
be adjusted automatically.
14
Confirmation of DVI input
operation
1. Input the image signal to the DVI-I terminal or
DVI-D terminal.
1. Confirm that the image is projected correctly with
digital input and analog input (only DVI-I).
2. Confirm that the HDCP authentication is available.
