Sharp PG-D2710X, Operation Manual

Page: 24 / 75

20
Setting Up the Projector (Continued)
Projection (PRJ) Mode
The projector can use any of the 4 projection modes shown in the diagram below. Select the
mode most appropriate for the projection setting in use. (You can set the PRJ mode in “SCR-
ADJ” menu. See page
49 .)
Table mounted, front projection
[Menu item
➞
“Front”]
Table mounted, rear projection
(with a translucent screen)
[Menu item
➞
“Rear”]
■
■
Ceiling mounted, front projection
[Menu item
➞
“C Front”]
Ceiling mounted, rear projection
(with a translucent screen)
[Menu item
➞
“C Rear”]
■
■
a
Ceiling-Mount Setup
It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this
installation. Before mounting the projector, contact your nearest Sharp Authorized Projector
Dealer or Service Center to obtain the recommended ceiling-mount adaptor and unit (sold
separately).