Sharp PG-C45X - Notevision XGA LCD Projector Operation Manual Download Page 87

Page: 87 / 107

Clean the air filter.

•

Clean the dust off the air filter and
cover with a vacuum cleaner extension
hose.

Replace the air filter.

•

Place the air filter underneath the tabs
on the filter cover.

Replace the filter cover.

•

Slide the filter cover in the direction of
the arrow to close it.

Note

•

Be sure the filter cover is securely
installed. The power will not turn on
unless it is correctly installed.

•

If dust or dirt has collected inside the
bottom air filter (not removable), clean the
filter with a vacuum cleaner extension
hose.

Replacing the Air Filter

-82

Summary of Contents for PG-C45X - Notevision XGA LCD Projector












































































































Search results

Summary of Contents for PG-C45X - Notevision XGA LCD Projector

Reviews:

Related manuals for PG-C45X - Notevision XGA LCD Projector

Brands by name

Popular brands

Sharp PG-C45X - Notevision XGA LCD Projector, Operation Manual

Search results

Summary of Contents for PG-C45X - Notevision XGA LCD Projector

Reviews:

Related manuals for PG-C45X - Notevision XGA LCD Projector

Brands by name

Popular brands