21
PG-C30XE
FRONT
M5
adjust lever
Lock screws
Lock screws
M4/M6
adjust lever
Lock screws
M1
adjust lever
Shielding plate G
slide
turn
turn
slide
turn
slide
Shielding plate R
Shielding plate B
Adjusting the optical axis of the mirrors (M1, M5 and M4/M6)
The optical axis must be readjusted if an eclipse happens with the R. G or B mirrors. Generally speaking,
this adjustment is needed when any of the internal optical components has been replaced.
Adjustment procedure required when any of the panels has been replaced or the convergence has been
adjusted
(1) Disconnect the flat cables of all the LCD panels.
(2) Let the lamp light up.
(3) To adjust the G mirror, shield the R and B mirrors with shielding plates (You can use a business card or the like to
block the light).
(4) Loosen the lock screw of the M1 adjust lever.
(5) Looking at the G image on the screen, turn or slide the M1 adjust lever until the eclipse on the screen disappears.
Tighten up the screw.
(6) To adjust the R mirror, shield the G and B mirrors and adjust the M5 adjust lever. For the B mirror, shield the R and
G mirrors and adjust the M6 adjust lever.
(Take the same steps 4 and 5 above.)
(7) Remove all the shielding plates to have a white image.
Make sure there is no eclipse.
Summary of Contents for PG-C30XE - Notevision XGA LCD Projector
Page 45: ...89 PG C30XE 88 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H BLOCK DIAGRAM BLOCKSCHALTBILD ...
Page 49: ...95 PG C30XE 94 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H Ë SIGNAL UNIT 1 2 SIGNALEINHEIT 1 2 ...
Page 50: ...97 PG C30XE 96 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H Ë SIGNAL UNIT 2 2 SIGNALEINHEIT 2 2 ...
Page 59: ...115 PG C30XE 114 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H Ë VIDEO UNIT VIDEOEINHEIT ...