![Sharp NTT docomo Aquos si Instruction Manual Download Page 18](http://html.mh-extra.com/html/sharp/ntt-docomo-aquos-si/ntt-docomo-aquos-si_instruction-manual_367194018.webp)
32
Call
SH-07E_E_04.fm
[32/36]
Contact the number listed in “General Inquiries” on the last page for
details on WORLD CALL.
To make an international call through a company other than
DOCOMO, contact the respective companies for instructions.
The caller ID may not be notified or displayed correctly
depending on overseas network operators. In this case, making
a call with incoming call history is not available.
1
When a call is received, the ringtone sounds
and the incoming illumination flashes
:
If you press
x
/
y
during an incoming call, you can stop the
ringtone, vibrator or flash of the incoming illumination.
2
Receive the call
:
Operate after touching [Activate].
1
Reject call with SMS
You can reject an incoming call and send a selected SMS
message to the other party.
2
Reject
You can reject the incoming call.
3
Accept
You can receive the call.
3
[End] to end the call
1
When a call is received, the ringtone sounds
and the incoming illumination flashes
2
[
z
]
/
[On hold]
1
When a call is received, the ringtone sounds
and the incoming illumination flashes
2
[
z
]
/
[Absence Memo]
Playing an answering memo
1
In the home screen, [
R
]
/
[Phone]
/
[
z
]
/
[Call settings]
2
[Call/Ans Memo]
/
[Answering Memo List]
/
select an answering memo
You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the using
condition during a call.
1
Add call
*
Place a current call on hold and make a call to another party.
2
End
End a call.
3
Dialpad
You can enter touch-tone signals.
4
Hold
Hold/Unhold a current call.
If you have added a call, [Switch] is displayed. Touch it to
switch to whom you talk.
5
Mute
Enable or disable mute setting on a current call.
6
Speaker
You can talk with hands-free.
When a Bluetooth device is connected, you can switch sound
emitting parts.
* Subscription to Call Waiting Service is required.
1
x
/
y
during a call
2
[-]/[+]
:
Alternatively, press
y
/
x
to adjust the volume.
3
[Close]
When Noise suppression is set to [ON], you can measure ambient
noises using the out-microphone and communicate by making your
voices sound clear during a call.
Noise suppression is set to [OFF] when you start talking on the
handset.
1
x
/
y
during a call
2
[OFF]/[ON]
3
[Close]
[Calling Method]
When calling to a land-line phone: 010
/
country code
/
area
code (city code)
/
the other party’s phone number
/
[
0
]
When calling to a mobile phone: 010
/
country code
/
the other
party’s phone number
/
[
0
]
・
As for the other parties’ phone numbers and area codes (city
codes) that begin with “0”, omit the first “0” when entering
(except some countries or regions such as Italy).
・
Alternatively, enter “009130-010” as usual or “+” instead of
“010”.
Receiving a call
Placing a call on hold
Answering by answering memo
Incoming illumination
Operation during a call
Note the following to use hands-free.
・
Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
・
When calling outdoors, in a location where surroundings are
noisy and where the sound echoes loudly, use an earphone/
microphone.
・
If the sound breaks up during a hands-free call, lower the
in-call volume.
Adjusting the in-call volume
Using Noise suppression
Noise suppression processes voices to make conversations
sound clear. Sound quality may vary depending on the
surrounding noises and the tone of the voice.
When using Noise suppression, make sure not to cover the
hole of the out-microphone and move the mouthpiece as close
to your mouth as possible for speaking.
SH-07E_E.book 32 ページ 2013年5月10日 金曜日 午後12時16分