17
Easy Start
1
After the projector turns on, the Setup Guide appears.
(When “Setup Guide” is set to “On”. See page
48
.)
2
Follow the steps in the Setup Guide and adjust the focus, height (angle) and picture size.
3
After adjusting the focus, height (angle) and picture size, press
ENTER
to fi nish the
Setup Guide.
4. Adjust the projected image with the Setup Guide
B
P. 26
Correcting trapezoidal distortion using Keystone Correction.
On the remote control
Shrinks
upper side.
Shrinks
lower side.
5. Correct trapezoidal distortion
B
P. 28
Press
INPUT
P
/
R
to display the INPUT list. Use
INPUT
P
/
R
to select the Input mode,
and use
O
/
Q
to select the audio input terminal.
On the
projector
On the remote
control
INPUT list
1 COMPUTER1
INPUT
Audio
2 MONITOR OUT
S-VIDEO
S
VIDEO
V
On the
projector
On the remote
control
6. Select the Input mode
B
P. 29
7. Turn the computer on
B
P. 25
8. Turn the power off
Press
STANDBY/ON
on the projector or
STANDBY
on the remote control, and then press
the button again while the confi rmation message is displayed to put the projector into
Standby mode.
On-screen display
On the
projector
On the remote
control
Summary of Contents for Notevision PG-D2510X
Page 76: ......
