MX-PEX2 Installation in MX-3500/4500 series 2 – 2
4)
Restore the MFP cnt PWB unit to the main unit, and fix with the
screws.
5)
Cut out the cut-out portion of the right rear cabinet cover for
cable along the perforated line. Attach the right rear cabinet
cover, and fix with the screw. Attach the ozone filter cover.
3. Installation of the printer controller
1)
Remove the four screws from the rear cabinet. Attach two step
screws (package part No. 2) to the two positions in four posi-
tions where the fixing screws have been removed.
2)
Engage the printer controller unit with the step screws, and
slide it to the right door side.
3)
Fix the print controller unit using the two screws of the four
screws removed in step 1.
4. Connector connection
1)
Connect the cable (A) of the I/F unit, the LAN cable (package
part No. 3), and the AC power cord (C) (package part No. 4).
4
3
2
1
1
1
1
1
2
1
2
A
B
C
