Sharp MX-M654N, Start Manual

Page: 11 / 148

11
Interface 10BASE-T/100BASE-TX/1000BASE-T,
USB 2.0 (when an external memory device is used)
Compatible
protocols
TCP/IP (IPv4)
Compatible OS *
2
Pull scan (TWAIN) Windows Server 2003, Windows Vista,
Windows Server 2008, Windows 7,
Windows 8, Windows Server 2012
Output format (B/W)
TIFF, PDF, PDF/A, encrypted PDF, XPS
Compression method: decompression, G3 (MH), G4 (MMR)
(Grey scale/colour)
TIFF, JPEG, PDF, PDF/A, encrypted PDF, high compression
PDF, XPS*
3
Compression method: JPEG (high, mid, and low
compression)
Driver Driver
*1: You must decrease the scan size when increasing the resolution.
*2: There are cases when a connection cannot be established. Please contact
your local dealer for more information.
*3: XPS stands for XML Paper Specification.
Wireless LAN Specifications
Type Built-in type
Compliance
standards
IEEE802.11n/g/b
Transmission
method
OFDM (IEEE 802.11n/g), DS-SS (IEEE 802.11b)
Frequency band
/ channels
IEEE802.11n/g/b: 2.4 GHz (ch 1 - ch 13)
Transmission
speed
(value of
standard) * 1
IEEE802.11n max. 150 Mbps
IEEE802.11g max. 54 Mbps
IEEE802.11b max. 11 Mbps
Compatible
protocols
TCP/IP (IPv4)
Security WEP, WPA Personal, WPA Enterprise*
2
, WPA2 Personal,
WPA2 Enterprise*
2
*1: The indicated values are maximum theoretical values for the Wireless LAN
Standard. The values do not indicate actual data transmission speeds.
*2: Cannot be used in Access Point mode.
PART NAMES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(11)
(12)
(13)
(10)
(1) Automatic document feeder (8) Tray 4
(2) Operation panel (9) Tray 1
(3) Keyboard (10) Curl Correction Unit*
(4) Front cover (11) Inserter*
(5) Tray 5* (12) Folding Unit*
(6) Tray 2 (13) Saddle stitch finisher*
(7) Tray 3
* Optional
TURNING THE POWER
ON AND OFF
This machine has a main power switch, found at the bottom left after
the front cover is opened, and a power button ( ), located on the
operation panel.
Main power
indicator
[Power Save]
button/indicator
Main power
switch
[Power] button
Turning on the power
• Switch the main power switch to the “ ” position.
• After the main power indicator lights in green, press the power
button ( ).
Turning off the power
(1) Press the power button ( ) to turn off the power.
(2) Switch the main power switch to the “ ” position.
Restarting the machine
In order for some settings to take effect, the machine must be
restarted. If a message in the touch panel prompts you to restart the
machine, press the power button ( ) to turn off the power and then
press the key again to turn the power back on.
CAUTION
• When turning off the power, make sure that the indicators on
the operation panel turn off as well.
• If the machine suddenly turns off, such as in the event of a
power failure, turn the machine on again, and then turn off
the machine following the correct procedure for turning off
the machine. Switching off the main power switch or
removing the power cord from the outlet while any of the
indicators are lit or blinking may damage the hard drive and
cause data to be lost.
• Switch off both the power button ( ) and the main power
switch and unplug the power cord if you suspect a machine
failure, if there is a bad thunderstorm nearby, or when you are
moving the machine.
• When using the fax or Internet fax function, always keep
the main power switch in the “ ” position.
• In some states of the machine, pressing the power button ( )
to restart will not make the settings take effect. In this case, use
the main power switch to switch the power off and then on.